Heat Bands, also known as shrink bands

	HEAT BANDS FOR GLASS BOTTLES	TEL: 800 573 4367

HEAT BANDS

What are heat bands?
	Heat bands, are a band of PVC plastic that fits around the cap and neck of a bottle or jar. The plastic heat band not only holds the cap in place, but ensures that the product has not been opened or tampered with. This plastic must then be torn and removed to open the bottle or jar. Once the heat band has been removed it is not possible to reapply the used band.

What size heat bands do I need?
	Each glass bottle or jar will show the correct size heat band needed for a perfect fit. To find the corresponding heat band size for an item, find the item on our website and look in the information section on the right side of its page. You will see the appropriate sized heat band listed in the "Accessories" section (ex. H55/38). The first number corresponds to the width in millimeters of the heat band. The second number shows the height in millimeters of the heat band.
How do I apply heat bands?

1. Select the correct size heat band for your product (Each product identifies the correct heat band size needed in its "accessories" description located to the right of the product image). Slide the heat band over the neck of the bottle, leaving enough room at the top for the heat band to form to the cork, screw cap, or other appropriate top.

2. Apply heat evenly with a heat gun or hair dryer until the heat band has shrunk tightly around the neck of the bottle giving you a snug tamper evident seal in just seconds.

-Heat bands make your products safe and acceptable for retail distribution.
-Heat bands will shrink in just seconds.
-Notice the heat bands are perforated making them easy to remove.

www.CouronneCo.com

About-us | Contact-us | Terms & Conditions